K-edge K13-520-[color] Bedienungsanleitung PDF herunterladen

WARNING: IT IS STRONGLY RECOMMENDED THAT YOU PERIODICALLY CHECK ALL BOLTS FOR PROPER TORQUE!!!

GARMIN® Mount Installation Instructions

(K13-520-[color])

Description:

The K-EDGE GARMIN Fixed Stem Mount is designed for installation of a GARMIN Edge® or GARMIN Forerunner® computer onto

a 1-1/8” Steerer Tube stacked above the stem.

Compatibility:

The K13-520 GARMIN Fixed Stem Mount is compatible with all GARMIN Edge® 200, 500, 510, 800, and 810 computers. It is also

compatible with the GARMIN Forerunner® 310XT and 910XT (with 'quick-release kit' purchased separately from GARMIN)

computers utilizing the same mounting system. NOTE: The GARMIN Forerunner® 910XT prevents the addition of a spacer on top

of the K13-520 due to interference issues – it is recommended that spacer be installed below the K13-520.

STEM RECOMMENDATIONS:

Stem Angle: 0 to Negative-Degree

Warnings:

These instructions are generalized to accommodate a wide range of setups for a bike. If your setup does not match what is being

described, take extra care in the process of your setup and contact K-EDGE Technical Support if you have any questions.

Improper installation of any K-EDGE product or use outside of its design intentions could lead not only to damaging the bike and

related components but could also cause personal injury to the rider.

Parts Included:

 K13-520

 1x K-EDGE GARMIN Fixed Stem Mount

 2x M3 x 6 mm (Blue Thread Lock applied)

Default Insert Position

for Garmin Edge®

Insert Position for Garmin

Forerunner® 310XT and 910XT

1 2 3 4

1 WARNING: IT IS STRONGLY RECOMMENDED THAT YOU PERIODICALLY CHECK ALL BOLTS FOR PROPER TORQUE!!! GARMIN® Mount Installation Instructions (K13-520-

2 WARNING: IT IS STRONGLY RECOMMENDED THAT YOU PERIODICALLY CHECK ALL BOLTS FOR PROPER TORQUE!!! Tools/Items Required:  Metric Allen Set (5/6 mm

Seite 3

3 WARNING: IT IS STRONGLY RECOMMENDED THAT YOU PERIODICALLY CHECK ALL BOLTS FOR PROPER TORQUE!!! NOTE: The K13-520 is factory assembled for immediat

4 WARNING: IT IS STRONGLY RECOMMENDED THAT YOU PERIODICALLY CHECK ALL BOLTS FOR PROPER TORQUE!!! Troubleshooting:  My mount hits the stem during

Keine Kommentare

K-edge K13-520-[color] Bedienungsanleitung