K-edge K13-520-[color] Bedienungsanleitung PDF herunterladen (Seite 3)

WARNING: IT IS STRONGLY RECOMMENDED THAT YOU PERIODICALLY CHECK ALL BOLTS FOR PROPER TORQUE!!!

NOTE: The K13-520 is factory assembled for immediate use with GARMIN Edge® computers without any adjustment

necessary, IF you intend to use the K13-520 with a GARMIN Forerunner® 310XT and 910XT computer, please follow the

steps below to adjust the insert (K13-503) to properly accept GARMIN Forerunner® computers.

Insert Adjustment:

1. Remove the 2x M3 x 6mm Flat Head Screws holding the K13-503.

2. Reposition K13-503 (see diagram above).

3. Reinstall, but do not fully tighten, the 2x M3 x 6mm Flat Head Screws.

4. Carefully torque the 2x M3 x 6mm Flat Head Screws to a Max of 1 N-m.

Caution: Do not over-torque the M3 x 6mm Flat Head screws.

Note: A small amount of thread lock has been applied to the M3 x 6mm bolt at the factory, it is recommended that

an additional amount be added if this bolt were to be adjusted multiple times.

1 2 3 4

Keine Kommentare

K-edge K13-520-[color] Bedienungsanleitung Seite 3